The thickness of the polyethylene film at face value: for bearing weight w3 kg – 100 microns, bearing a mass of Z. It is not something Gary Kelly would like to discuss. .. 8 kg – 150 microns. Pasting an open interface is a polyethylene film with adhesive layer. I tapered split bearing diameter 200 mm with a mass greater than 5 kg are wrapped separately outer ring and inner rings of blocks. Allowed joint wrapping split bearing provided laying paper or film between the block and the outer ring. Individual parts, canned lanolin emulsion, packaged individually or in a group of inhibited and then waxed paper or plastic bag with a embedded in a inhibited paper.
Individual parts, canned or inhibited IBAC LB oil, packaged in plastic wrap, without pre-wrapping of the initialed paper. Bearings with diameters from 200 to 300 mm mass 8 kg packed in polyethylene bags and then into a package of PVC film with shelf life of 6 years. Allowed to use one packet of polyethylene thickness of 200 microns at face value. When packed in polyethylene excess air bags are removed by suction or otzhatiem. Allowed an additional package to the second plastic bag with a bag of silica gel between the bags. Bearings, weighing more than W kg packed by direct bearing winding strips of waxed paper capacitors and plastic film through the holes. Permitted other methods and materials inside the package to ensure the safety of bearings and protect them from corrosion. Packing boxes and bearings in packs of cardboard. General packaging requirements of bearings in the box and packs are installed GOST 520-89 and are as follows: bearings with outer diameter of 300 mm, weighing up to 8kg of accuracy classes 5,4, 2, and bearing accuracy classes and six special purpose must be packed in boxes or bundles (TU 37.006.096-89) instrument bearings with outer diameter of 30 mm of accuracy classes are packaged in boxes, with the bearing accuracy classes 6, 5, 4, 2, T pre-packaged in plastic tubes or plastic bags.