Mechanical Manufacturers

Distinguish visible and hidden fasteners. Visible fixing easier, by capping, screws – screws or rivets. Apparent suspension system consists of a vertically placed T-shaped profiles, for which by means of special brackets (capping, clips) are mounted facing materials. Junction to metal cladding is non-rigid way through the silicone seal or waterproof sponge pads. Capping attached to the substructure with stainless steel rivets. To give the whole structure a single color, the visible parts are painted in a color fixing cladding material. Leading Manufacturers fasteners are used only in the powder coating. The advantages of the system are apparent: a low cost of substructure, even in the case of reducing the size of ceramic tile, maximum flexibility, possibility of replacing the plate without any mechanical effort.

Concealed mount is used for mounting the cassette-type cladding, granite, natural stone. In the last two cases, covering materials requiring additional processing that leads to higher construction ventilated facade. Concealed mounting types (granite, natural stone slabs such as "marmarok", etc.) may be the following: hidden mechanical mount; hidden fastening combination (mechanical / adhesive); concealed fixing with attaching plates to the profiles; hidden fixing points (pins) for slabs 2-3 cm thick For concealed mechanical fastening plates are usually hung on a frame in the four mounting points. Anchor hole drilled in the mounting points on the rear side panels, then the hole is inserted a screw anchor dowel. Further, the bracket is attached latch or bolt of stainless steel. Plates are normally supplied drilled.