Jenoptik Laser Products

At the leading trade fair for plastics and rubber, the K in Dusseldorf, the Jenoptik lasers & material processing their competence Division shows in the fields of plastics processing and purification. Jena, October 9th, 2013 – with its extensive product range the Jenoptik lasers & material processing Division offers solutions for welding, cutting and perforating plastics. In Hall 11, stand C45 at the plastics show K presents Jenoptik visitors including the series JENOPTIK VOTAN W for laser welding, the disk laser JenLas disk IR70E, a fiber-coupled diode laser module, as well as the new system for the purification of waste in the printing industry, KATASORB PRINT. Non-contact laser welding with JENOPTIK VOTAN W thanks to state of the art laser technology provide a constantly new applications in materials processing. When cutting, welding and perforating of plastics, laser technology is a well-established and recognized procedures, among others in the automotive and supplier industry. The increasing of the vehicle interior equipment and the for security, the carmaker make demand always new challenges these can be solved VOTAN W reliably through the use of the JENOPTIK.

At the Dusseldorf fair of plastic K Jenoptik shows its latest development in the field of plastic welding: to extend the application possibilities of laser transmission welding, Jenoptik has developed welding with a laser line at a – and that can be disconnected. This new process was successfully used already several times in the industry. Essential advantages of this new technology are not only the non-contact connection technology without mechanical and thermal influence, but also high productivity and relatively low operating costs. This innovative method is applied when the laser transmission welding of large plastic components, such as the welding of shot channels on instrument panels or the welding of door panels. For the newly developed laser welding are innovative diode lasers from its own House with a width of 10 millimeters (mm) and an optical laser power up to 100 watts per sub Mount for the standard wavelengths 808, 940 and 980 nm.

Photovoltaic Modules

Cut handsome subsidies is compensated according to financial test calculations, is to be expected in the coming years with a strong increase in yield when the solar systems. The consumer portal preisvergleich.de shows where to find the reasons and what private power generators must pay attention to 2010. Given the high cost, the investment in photovoltaic modules on the homeowner wanted to be deliberate in recent years. As the financial experts now said Stiftung Warentest, prices for technology declined significantly last year: buyers range in the fourth quarter of 26 percent compared to 2008. This compensates for the reduction of State subsidies: private power producers were given power 2009 approximately 40,01 cents per kilowatt hour (), which they in the municipal network dined a, there are only 39,14 cents this year.

This corresponds to a reduction of nine percent. For 2011, the renewable energies Act envisages a reduction by a further nine percent. Arrange the falling purchase prices for solar installations Government representatives in addition, the Act to amend and even faster than planned to reduce the subsidies. Who still thinks about the installation of a solar system, you should use the currently very low market prices and forestall a new law. So, the compensation rates of the acquisition time are basically for the next 20 years. Also, the steadily rising electricity prices are undeniable. Hear from experts in the field like Philip Vasan for a more varied view. Last but not least make more attractive the privately generated electricity for own consumption. More information: service/press contact: Lisa Neumann University first media GmbH barefoot streets 12 04109 Leipzig Tel: + 49/341/49288-240 fax: + 49/341/49288-59

Lau Kakar

The essential range includes the design, tool and fixture design, the pressure casting process as such until further and finishing including Assembly, surface coating and logistics. In this way, LAU Kotter realized more cost savings for the customer. Just-in-time deliveries are just as self-evident as providing a consignment warehouse carrier, special packaging solutions and the digital goods input capture the construction individual. New quality standards define standard LAU Kal is not enough. Certified according to TS the company sees 16 949 standards and requirements as an orientation for a system that makes the engine for the improvement of processes, technologies and own quality claim. This includes, as well, every day to make our own actions to the test and to critically. Undoubtedly a tremendous discipline and willingness to self awareness is needed for what but according to LAU Kotter as Developed key to success.

Information on measuring results, Committee numbers, error messages and other information are stored in a special database, which provides a sophisticated documentation LAU Kal with a maximum of transparency. Each individual step can be traced thus in hindsight. This precise data acquisition is the basis for improving management and indicator to reduce possible errors. Production site Germany LAU Kal is a very good example, that a German manufacturing plant can produce at competitive prices and at the same time plays an important role in the global business of pressure casting. So many components made by LAU Kakar in almost all parts of the world find themselves. Customers choose LAU Kotter as a partner because it solves real problems and with his ideas new impulses magnesium or aluminum sets – for example, the lightweight materials instead of steel or other materials. Wearing an extremely high customer orientation and continuity in business management helped that LAU Kotter can assert itself in international competition.

The simple project management and open communication, a willingness to proactively foster innovation, as well as the high standard of quality contribute to acquiring new customers and binding existing at the company. Employees play an important role. Fair give and take, as well as the creation of new opportunities for the further development of own convincing employees and leads to a high affinity. This creates a smooth workflow and a cross-disciplinary communication and efficient processing of customer projects. Leads the way in the future, the direction is clearly defined at Lau Kakar. Not higher, further, excellence rather the company wants to concentrate on its core competence, the aluminum / magnesium pressure casting technology. Step by step healthy growth through investments realized – always with the proviso, to find other applications for die casting, new impetus to create and customers through a commitment to inspire. But above all the region is LAU Kotter at heart. So the company is open to developing economic and engaged itself supports the initiative Jobborse Wadersloh in local clubs, and also opens in the framework of the girls day to bring to technology lovers girls the pressure casting technology. The Foundry Hall built just at the beginning of the year and the recent investments in new machines anyway, offer a perfect technical infrastructure for a modern, future-oriented workplace.

MCM Estate

“Stable, robust and reliable”, writes to the trend in Magdeburg the real estate newspaper currently. Although the capital of Saxe anhaltinische could hold not the positive development of the previous year in terms of rental, but this was marked by a special effect. So rented proud 15,000 square meters in one fell swoop in 2011 the Ministry of environment of the country and thus “distorting” the big picture. Extrapolating this rental earnings from 2012, Magdeburg increased again in 2012. To give an impression of the economic situation of the city: despite rising population, decreases in the unemployment rate significantly.

Magdeburg is in the Eastern European cities network said continued attractive prospects offers in the real estate market. The charge of MCM investor Management AG to see continued good prospects for investors. The vacancy in the city declined in 2012 to 13.5 per cent (previous year 13.7 percent), very sensitively dealing with no longer rehabilitation-enabled objects. The demand is unbroken, which is why professionals determine that Magdeburg real estate market is stable through and through. Because even withdrawing the “market bodies”, which fell vacant massively off.

There are currently living around 230,000 inhabitants in the town. The top rent for Office objects remains at 10.50 euros per square metre, on average there are around 8.50 euros. Investor interest is undiminished, because in particular apartments are currently still considerably cheaper to acquire than, for example, in Berlin. But the demand comes increasingly from its own users. High in the favor of investors maintained apartment buildings stand, so the real estate newspaper. A business which operates MCM very successfully for many years and this benefit investors in the form of profit participation rights. A smart strategy, because many investors would benefit with manageable amounts better from the professional as to be years-bound itself on many real estate development business. For more information, MCM investor Management AG

BIM System

Jenoptik s business division laser systems in the field of lasers & material processing receives the American Vision Award 2013 for the JENOPTIK-VOTAN BIM. The JENOPTIK laser cutting system-VOTAN BIM is the product that have the greatest potential of the nominated products to solve business challenges through technological innovation. Jenoptik have clearly proven by the technological progress with the laser cutting system. Main criteria award were the three aspects of innovation, value and impact for the vision. Sponsored by the American Technology magazine of high tech views, the award program was launched in 1996 in life, to capture innovations in applications of information technology. The customer benefits of technology innovation is at the Centre of the assessment.

Laser machine for demanding tasks in the 3D-Metallbearbeitung. The Jenoptik’s Division had the JENOPTIK laser cutting system-VOTAN BIM (beam in motion) presented in the autumn of 2012 for the first time in the United States. The system combines a fixed laser with robot-assisted Motion sequences. The centerpiece is a laser robot with integrated beam Guide. The robot arm is unique, because the laser beam is fully integrated and extremely precise with a repeat accuracy of + 100 m can be done”, so Christon Manzella, sales manager of the Jenoptik laser systems in North America Division. With the new plant concept, currently, laser services can be used by up to 5 kilowatts.

The advantages of a robotic system, such as the high mobility and accessibility, precision and dynamics of the system, remain unchanged. Finds the JENOPTIK-VOTAN BIM for the laser cutting of 3D-Metallbauteilen especially in the automotive industry, for example for complex 3D-Karosserie-and construction parts or hydroformed tubes for exhaust systems and car body components. But also the machining of contours and the placement of function holes in so-called white goods, in tanks and containers are made considerably easier by the laser machine. The other possible applications Laser cutting system is the processing of thin metal parts and demanding profiles such as an aspirator or an exhaust system. “The innovation in the JENOPTIK-VOTAN BIM is in your flexibility in the processing speed and efficiency in cost and process maps, which offers various advantages above all car manufacturers and automotive suppliers”, summarizes Christon Manzella. The axis movements of the robot arms are up to 60 percent faster than the norm in the laser metal processing and allow therefore shorter cycle times than conventional metalworking laser robots.” Other advantages of the JENOPTIK laser machine-VOTAN BIM are an excellent contour accuracy for high-quality cutting result, short commissioning and implementation times and low operating costs through energy-efficient laser sources. Also, the laser cutting system distinguishes itself by its compact design and the extremely flexible handling as also dynamics.

German Chancellor Gerhard Schroder

Also informed Rajapack Sales Director Ralf Kreuzer young people about different distribution channels and the tasks of a seller’s: A good salesman is not only characterized by the fact that he knows its products inside and out. He should can be also communicative and a little bit Extrovert and good people respond to.” In the pattern camp, the students could then take a selection of products in inspection and give it a shot. So the bottle packaging students assembled and welded a bag automatically. The cushion Instapak Quick RT sparked the most interest in the students. This cushion not only provide optimal protection, but is certainly also excellent as a foot warmer,”laughs Dreizehntklasslerin Julia Koninger. It is impressive to see how many different packaging there are and what kind of work it is.” A groundbreaking visit Rajapack took already for the second time the german French discovery day part, while he represented a premiere for the home school lender. “Rajapack are convinced of the benefits of the project: we offer young people the opportunity to get an insight into our work and get to know them at the same time”, said Harald Schonfeld, Director-General Raja Pack.

So we can draw attention to highly trained professionals on us and they win maybe later than employees for our company.” “The day of the project also came across pages of home school lender positive response: our visit to Rajapack has exceeded our expectations”, so Petra Dollhofer. It was nice to see that knowledge of French in everyday working life can be a real advantage especially if you would like to compete in an international company.” The german French day was proclaimed for the first time in 2003 by French President Jacques Chirac and German Chancellor Gerhard Schroder. He is under the auspices of the Federal Foreign Office and of the Ministere of the affaires etrangeres et europeennes (French Ministry of Foreign Affairs). The aim of the initiative is to Terminal in France to bring closer to the working life of the neighbouring country pupils of 7 to 13 in Germany and the 6e classes, as well as to stimulate interest in language and culture. Rajapack r Pack GmbH is the German subsidiary of the international group of RAJA.

The French group of companies offers a total 500,000 customers first-class solutions and numerous products for packaging and shipping. Five Logistics Centers allow with over 100,000 square metres of warehouse space, ordered goods within 24/48 hours in eleven countries in Europe to deliver. With over 820 employees, the RAJA group generated an annual turnover of EUR 223 million in 2009. More than 4,500 innovative packaging solutions with an optimal price/performance ratio can be found in the current range. The company, based in Birkenfeld attaches particular importance to its comprehensive customer service, on a clear commitment to environmental protection, as well as a professional wholesale service.

Bonro Has Strong Growth

In 2010 the online shop Bonrp has gained a lot in sales EC-cash rolls: Bonro achieved strong 2010 Umsatzwachse 2010 Bonro company made as many rolls sold like never before the online discounter has bonro.de 2010 strong sales growth. The famous online shop is with cash register rolls, Thermorollen and Bon roles of any kind. The increase in the sale of EC-cash roll is almost no longer to describe, according to Managing Director Thomas Hintz. The past year was generally a success on the whole route. Sales almost doubled. This has resulted in that the online store had to create larger storage capacities. Another positive aspect of this growth is that new staff had to be hired. The rising sales have a positive aspect for the customers by Bonro.

The larger quantities have larger purchase quantities result. This has led in 2010, that no price increases had to be passed. Last year, Bonro has many positive aspects for the online shop in Gear. These include that many other roles were included in the shop. Also, the corresponding Ribbons are available for all popular POS systems. The shipping was set to a new logistics. A standard transit time of 24 hours is to realize. New payment systems have been embedded in the shop.

In the area of consulting the phone area was expanded in addition more. The rating system Ekomi shows only satisfied customers. Existing customers regularly receive newsletter with great discount offers and information. In 2012, many customers can continue to hope action because Bonro has many ideas in the pipeline.

Katrin Customers

Touch and try out is strongly encouraged. A lively, but also very personal atmosphere invites you to the conversation. First impressions count”, certainly to Schonfeld. We want our clients feel comfortable and at the same time good advice. “If we already prove our competence as a packaging specialist at the fair, further discussions arise and in the best case even a collaboration.” Our customer service department as an interlocutor available at easyFairs packaging 2011 of LogiMAT. They know their products in detail and also like to very specific questions.

Customers benefit from over 50 years of experience in the market of the RAJA Group Europe’s no. 1 in the packaging. Our spectrum of customers is extremely heterogeneous from the small entrepreneurs to major corporations, everything is represented”, so Schonfeld. The individual advice which is exactly to the specific customer request is all the more important. Just so we can offer our customers always the right Offer solution.” Comprehensive customer service and consultation generally play a large role in Rajapack. To ensure a permanent contact with the customers and so a faster responsiveness, Raja Pack uses a multi channel strategy and relies on catalogues, Internet, telephone and field alike. This guarantees especially best advice customers in addition to an ever-growing assortment and fast delivery.

Rajapack r Pack GmbH is the German subsidiary of the international group of RAJA. The French group of companies offers a total 500,000 customers first-class solutions and numerous products for packaging and shipping. Five Logistics Centers allow with over 100,000 square metres of warehouse space, ordered goods within 24/48 hours in eleven countries in Europe to deliver. 820 employees, the RAJA group generated an annual turnover of EUR 223 million in 2009. In the current range, you will find more than 9,000 innovative packaging solutions with a optimum price/performance ratio. The company, based in Birkenfeld attaches particular importance to its comprehensive customer service, commitment to environmental protection, as well as a professional wholesale service.